How To Turn off Your Android Phone

Photo of author

By Muhammad Usman

Smartphones have evolved into indispensable tools for the majority of organizations, but they occasionally exhibit unexpected behavior. Rather of smashing your Android device against your office wall if it has fully frozen or slowed to a crawl, try a few simple troubleshooting techniques first. If the phone can be turned off normally with button presses, otherwise a forced reboot will need to be performed.

Power Off Normally

To wake your Android from sleep mode, press the “Power” button on the device.

Hold down the “Power” button for two seconds to see the Device Options window.

In the dialog box, select “Power Off.” The apparatus will turn off. Press and hold the power button until the boot screen shows to restart the device.

Unwanted Reboot

Hold down the “Power” button.

Hold down the “Volume Up” button while pressing. Some Android devices may need you to hit a different button, such as the “Home” or “Menu” button, such as those without external volume controls.

Hold down both buttons continuously until the device restarts.

Warning

When you reboot your Android device, all saved documents will be lost.

How to Reset a Nexus 7 Back to Factory Settings

With a few straightforward keystrokes, you may completely reset a Nexus 7 whether you’re switching to a new mobile device, selling or trading your old one in for a new one, or you just want to return your device to its factory settings. Please keep in mind that after a device reset, all of the data, apps, and information saved there will be lost and unrecoverable.

Reset Device

Your device’s “Settings” menu on the home screen allows you to delete every app and piece of personal information from it. “Factory data reset” can be found under the “Backup & reset” option. Select the “Reset tablet” menu item. Select “Erase everything” to confirm the factory reset after entering any necessary credentials. You must wait a short while for the reset to finish before you can set up the device as a new one.

Recovery Mode Resets

You can enable the factory reset option by going into recovery mode if your Nexus 7 is not responding. The “Power” and “Volume” buttons must be used to access the menus on the device while in recovery mode. Be sure to turn off your tablet before pressing and holding the “Power” and “Volume Down” buttons at the same time until your tablet turns on. Once “Recovery mode” has been highlighted by pressing “Volume Down” twice, the device will start in recovery mode when you click the “Power” button. An image of an Android robot with a red exclamation mark appears on your screen if recovery mode was successfully accessed. The “Wipe data/factory reset” option can be found by pressing and holding the “Power” button while scrolling with the “Volume Up” button. To choose the factory reset option, hit the “Power” button. Then, to confirm your choice, select “Yes – wipe all user data” and press “Power” once more.

How to Turn a Google Pixel Phone Off

Again, turning off a Google Pixel phone is as simple as touching hardware buttons or selecting an option on the screen.

How to Use Hardware Buttons

Hold down the Power+Volume Up buttons while turning off your Pixel 6 or later. Press and hold the Power button on the Pixel 5a and older variants for a few seconds.

Pick “Power Off” from the Power menu when it appears.

Your phone will then start to shut down.

On-Screen Button Use

Pull twice from the top of the screen on your Pixel phone to use the on-screen technique. Following that, press the Power icon located at the base of the Quick Settings tiles.

Go to the Power menu and select “Power Off.”

There are actions you can take to troubleshoot if later on your Android phone won’t turn back on.

How to reboot an Android device without the power button

The following are five simple ways to turn on your smartphone without pressing the power button:

Install your charger

Simply plug in your charger to reset your phone if you need to and your battery has run out.

By means of recovery mode

You must turn off your Android phone in order for this approach to function; it is only compatible with Android smartphones. Simply connect your USB cord, then press and hold the volume down and up buttons continuously to boot into recovery mode. Simply hit exit to restart the device when the menus show here. As a result of several manufacturers using various Android versions, this may change.

Using outside applications on an Android phone

The power menu, where you can immediately provide permission to restart your device, can be immediately invoked by third-party apps like Power Menu and Shutdown.

  • From the Play Store, download Power Menu or Shutdown.
  • Upon startup, grant accessibility permission.
  • Your power menu will open immediately when you tap “Open Power Menu” at that point. Your gadget has two options: shutdown and restart.

planned power on/off

Most current cellphones today include capabilities for scheduled power on and off. Simply set the timing so that it restarts your phone if all you want to do is that. Choose the time when the light will turn on, for example, 11:58 PM and 12:00 AM. This will be helpful as well.

Exactly turning off your iPhone at a set time is not possible. However, if you’ve set an alarm and the gadget is off, it will switch on by itself when the alarm goes off without you having to press the power button.

Using ADB, restart an Android device

Additionally, this approach only functions on Android. You must enable USB debugging and your smartphone’s developer options for this to function.

  • Select “About phone” under Android Settings. The message “You are now a developer” will appear after you have repeatedly tapped Build number.

Visit Android Settings > Developer settings > USB debugging next.

  • Utilize a USB cable to link your Android device to a computer or laptop. A notification that USB debugging is connected would then appear.
  • Get Android Debug Bridge (ADB) on your computer and install it.
  • Locate this directory C:adb and launch command prompt by typing cmd in your computer’s location directory. using Windows
  • Enter the keyword adb devices. You will be able to see the linked phone’s IMEI serial number.
Photo of author

Muhammad Usman

Leave a Comment